KVM Extender
A
CAT5 Extender over IP (HDMI)
ESC101-TU1-RU1-M

The CAT5 extender includes HDMI KVM, USB with Analog audio, RS232, and IR CAT5 extender design for extending and distributing all signals over one CAT5 up to 150 meters, with local HD monitor output.  It provides superior video quality up to 1920 x 1200 resolutions, and using cost effective Cat5e cable, instead of HDMI, RS232 cables, for an easy, neater and reliable installation. The local and remote units can be connected together for a Point-to-Point connection via CAT5e/6 cable or a Point-to-Many connection via a managed network switch.  Any combination of HDMI transmitters and receivers can be used, easy to increase more sources or monitor for a flexible application.   It is optimized for applications at broadcasting system, multimedia display and multi-data sharing, digital signage, home network integration, and industrial control, hospital, education, security, matrix network system and system control over RS232 and equipment control over IR.

 

Extend and distribute HDMI signal with bi-directional RS232, USB signal, IR and analog audio signals over LAN.

 

Video/Audio

  • Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA) 32bpp@ 60 Hz
  • HDMI 1.3b and HDCP compliant.
  • Transmitter unit built in HDMI local loop output.
  • HDMI audio support up to LPCM 7.1@192Khz
  • Built in Bi-Directional analog audio transmission (only in point to point mode).

 

USB / Serial / IR

  • Receiver unit with 4 ports USB devices (1 port USB 1.1 & 3 Port USB 2.0), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
  • Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX. 
  • Supports 2-way RS232 commands at baud rate 115200 (control software on a PC, or other automated control system hardware) to control devices attached to the matrix using RS232. Full Duplex data communication.
  • Built in Bi-Directional IR.

 

Transmission

  • Transmission range up to 150m over CAT5e, 180M over CAT6.
  • Support point to point and multiple source devices to multi-display connections via Gigabit network switch. 
  • Support total of transmitter unit up to 16 pieces, receiver unit over 254 pieces based on the number of ports on your network switch.
  • Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
  • Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.

 

Setting input/output mapping

  • By Rotary Switch
  • By Window based management software using PC computer
  • By Android/iOS APP control
  • By IR remote control unit

Part NO.

Video Interface

Resolution

TX

RX

USB

RS232

IR

Audio

ES101-TU1-M

HDMI

1080p

V

 

V

V

V

V

ES101-RU1-M

HDMI

1080p

 

V

V

V

V

V